Showtec Galactic RGB 300 300mW, stepper motor

• 300mW RGB Laser system
• IR Remote control
• DMX, Auto & Sound control
• Stepper motor
Another affordable addition to the galactic series, the galactic RGB-300 value line. This laser has a total power of 300mW with TTL Modulation on 3 laser modules, RGB. It can be controlled by DMX or with the included IR Remote. It has many built-in patterns a sound activated & stand-alone show, and works with master slave. The IR Remote gives you the possibility to control colors, patterns and start the auto or sound show. Because an external DMX controller is not necessary anymore, this unit is very suitable to use at places where DMX signal is not available.

Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's an remote interlock is necessary for safety regulations.

Specification:
Power Input: AC 100-240V, 50/60Hz
Power Consumption: 23 Watt
Laser Colour: Red, Green and Blue
Laser Power: 150mW 650nm Red, 50mW 532nm Green, 100mW 450nm Blue
Laser Modulation: TTL
Laser Class: 3B
Scan Angle: +/-20?
Scan speed: Stepping motor
Control Modes: Auto, Sound, Master/Slave, DMX, IR Remote
Control Display: 3 Digit LED
DMX Channels: 10
Data Connector: XLR In- & Out (3Pin)
Power Connection: IEC
Safety Features: Key switch, Interlock, Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2, 2007-03
Dimensions: 200 x 148 x 160mm (W x D x H excl. bracket)
Weight: 1,7 Kg
Accessories: 2 Keys, Interlock test connector

Remarks:
300mW, stepper motor
Tariff No.: 9405 40 99