DAP-Audio DLM Speakerset incl. poles

• 4000W Total RMS Power Class-D amplifiers
• CELESTION high-driver inside
• Ultra lightweight, rugged and compact design
• DSP allows you to personalize your sound
• Dual input for making your mix
Set contains:
2x D3223 DLM-12A Top
2x D3224 DLM-12SA Sub
2x D8610 Distance tube 35mm
The DLM series is our new solution for all entertainers who need a very lightweight and compact speaker system which is very rugged and roadproof. Due to the efficient Class-D power amplifier and build-in DSP protection system, it is almost impossible to deform your sound when normally used.
High-end components, including a CELESTION high-driver, give lots of sound pressure and a very high detailed sound. If you want to have a more personalized sound, this is no problem for the DLM. Just add the optional USB control module and now it is possible to adjust the Gain, Equalizer, Low- & High-pass filter by simply using the interface on your laptop

Specification:
DLM-12A: 2-way Active Speaker system
Coverage: 90° conical
Transducer: 12" Woofer, 2.5" voice coil
Driver: 1" Exit Compression CELESTION Driver, 1.75" Voice Coil
Active Crossover 1.85kHz-DSP Processed with 24dB slope
Digital Presets: NORMAL / USER
Frequency response: 45Hz-20kHz (-10dB)
Max SPL @ 1m: 128dB
Power Amp: High power 500W Low + 500W High
Input 1: (MIC/Line) with Combo XLR/Jack
Input 2: Combo XLR/Jack and RCA
Mix Output: Male XLR balanced
USB Control (optional): Gain/EQ/ Trim / high pass filter,and low pass filter and bandpass filter
External Control: Volume Control
Phase Switch
Power ON
Clip Limiter
USB PORT for optional USB control
Electric Protection: Thermal/Convection-Fan/Overload/Digital Lim./Compressor
Handling: One standard 35mm metal pole-mount plus one handle on top
Enclosure: 15mm poplar plywood cabinet & ABS High-strength top and bottom protectors
Dimensions (HxWxD): 414x388x365mm
Weight: 18,7Kg

DLM-12SA: 12" Active Subwoofer Speaker system
Transducer: 12" Woofer, 3" voice coil
Active Crossover: 60Hz - 120Hz-DSP Processor
Digital Presets: NORMAL/ USER
Frequency Response: 35Hz - 200Hz (-10dB)
Max SPL @1m: 128dB
Power Amp: High power Class D 1000W
Inputs: Female XLR balanced differential(stereo left/ right)
Input Level: Line -4dBu
Full range Output: Male XLR balanced
High Pass Output: Male XLR balanced
USB Control (optional): Gain/EQ/ Trim / high pass filter,and low pass filter and bandpass filter
External Control: Volume Control
Phase Switch
Power ON
Clip Limiter
USB PORT for optional USB control
Electric Protection: Thermal/Convection-Fan/Overload/Digital Lim./Compressor
Handling: One standard 35mm metal pole-mount plus two handles
Enclosure: 15mm poplar plywood cabinet.
Dimensions (HxWxD): 439x417x512mm
Weight: 18,7Kg

Remarks:
incl. poles
Tariff No.: 8518 22 00