DAP-Audio HP-2100 2U 2x 1000W Amplifier

• Full protection circuits
• Efficient forced air cooling
• Stereo & Bridge mode
The HP-1500 and HP-2100 are the mid-range of the DAP Audio HP power amplifier series and are ideal for medium-sized events and clubs. Both with sufficient output to provide the audience with powerful basses and impressive highs.


The DAP HP Series consists of 5 models, representing output powers from stereo 200W until 1400W RMS at 4 ohms. All including the best protection circuits, built in a strong solid housing with forced air-cooling to achieve many years of reliable power. They are the best mobile choice for musicians, DJs, and entertainers but also perfect for installations in discos, pubs or any kind of public areas.

Specification:
Output Power
Stereo 2Ohm: Not Allowed
Stereo 4Ohm: 2x 1000 Watt RMS
Stereo 8Ohm: 2x 700 Watt RMS
Bridge 2Ohm: Not Allowed
Bridge 4Ohm: Not Allowed
Bridge 8Ohm: 1x2000 Watt RMS
Frequency Response: 10Hz - 20KHz, +/-1dB
THD: <0.5%
S/N rate: >100dB A-weighted
Crosstalk: >75dB
Damping Factor: >250   8 OHM
Gain: 34.5dB
Input Sensitivity: 0,85V (+/-1dBv)
Input Impedance: 20kOhm balanced, 10kOhm unbalanced
Output Mode: Stereo / Parallel / Bridge
Amp Technology: Class H
Protection: Clip Limiter (Fixed)
Short Circuit
Overheat
Overload
DC Voltage
Cooling: Forced-air by axial fan
Airflow: Front to side
Input Connectors: 3-pin XLR
Output Connectors: Speakon
Power Connector: IEC
Input Voltage: 210~240VAC, 50/60Hz
Dimensions: 483 x 360 x 88mm
Weight: 14Kg

Remarks:
2U 2x 1000W Amplifier
Tariff No.: 8518 40 80

Substitute:
75HD4165