DAP-Audio VPA-250 250W/100 Volt Power Amplifier

Features:
• Two microphone inputs, two auxiliary inputs and two AUX out for line.
• Transformer isolated 240V, 110V, 70V and 4-16 Ohms speaker outputs.
• Muting function.
• Individual volume control and master volume control.
• Low and high tone control
• Output circuit shorting protection & alarm.
• Chime output.

Frontpanel:
• Power switch.
• Power indicator LED
• LED level meter
• Clip
• Z1 switch
• Z2 switch
• Z3 switch
• Z4 switch
• Master volume control
• Treble control
• Bass control
• AUX 2 volume control
• AUX 1 volume control
• MIC 2 volume control
• MIC 1 volume control
• MIC 2 input jack
• MIC 1 input jack
• Chime rest

Specification:
Model: VPA-60 VPA-150 VPA-250
Output: 60W 150W 250W
Output regulation: Less than 3 dB, no load to full load
Speaker output: Balanced 4-16 Ohm, 70V, 110V, 240V
AUX output: 600 Ohm 1V (0 dBV)
Inputs: Mic 1,2/600 Ohm, 2.0 mV (-54 dBV), unbalanced
AUX 1,2/10 kilo-Ohm, 250 mV (-10 dBV), unbalanced
Freq. response 100 Hz-16 kHz
Distortion: Less than 0.1% at 1 kHz, 1/3 rated power
Signal to noise ratio: Microphone 1,2 66 dB
AUX 1,2 70 dB
Tone: Bass: +- 10 dB at 100 Hz
Treble: + -10 dB at 10 Hz
Protection: AC fuse DC voltage, overload and short circuit.
Muting function: Mic 1 overrides, other input signals with 0~-30 dB attenuation.
Power Requirements: AC 220~240V/50~60 Hz
Power Consumption: 100W 200W 320W
Dimensions: 483 x 400 x 89 mm
Gross Weight: 16 kg 20 kg 24 kg

Remarks:
250W/100 Volt Power Amplifier
Tariff No.: 8518 40 80