DMT Pixel Tile P25 MKII DMX, Kling- & Artnet

• Klingnet, Artnet, DMX
• Built-in Ethernet switch
• P25, 12x12 pixels
• Built-in programs
The Pixeltile P25 MKII is a square 300x300mm pixel fixture. It is equipped with Klingnet, Artnet and DMX protocol. This makes it possible to use the Pixel tile with a wide range of controllers and software. It has two Ethernet RJ-45 ports with a built-in switch for linking Klingnet or Artnet. Powercon in/out and DMX in/out for daisy chain power and data. The 2x18 character display makes it easy to set network and fixture settings. The DMT Pixeltile P25 contains 144 pixels with a pitch of 25mm. The pixels are mounted in a configuration of 12x12. It has a sliding bracket for flexible rigging and the possibility to connect multiple battens in vertical position to eliminate gaps in between. Each batten should always be rigged separately. Use the Tile in combination with the strip and the batten to make creative visual setups. The Pixeltile also has the same measurements as the Showtec White pix which makes them easy to combine in a grid.

Specification:
Light Source
LED System: 144x 5050 SMD RGB
Luminance: 850 nits
Refresh rate: 100Hz

Electrical
Power Supply: 100-240 VAC, 50/60Hz
Power Consumption: 150W Max

Control
Control Protocol: DMX512, Artnet, Klingnet
DMX channels: 8, 432Ch
Built-in programs: 30 (can be selected over DMX512)

Optical system
Dimmer: 0-100%
Max strobe freq: 25Hz
View Angle: 120 degrees
Pixels: 12Hx12V
Pixelpitch: 25mm
Cover: Medium Frost

Physical
Dimensions: 300 x 300 x 60mm (Excl bracket)
Weight: 5,2Kg
Housing: Die-cast aluminium, metal bracket
Color: Black
Power Connectors: Blue/White Power connector
Data Connectors: 3p XLR, RJ-45 in-&output
Cooling: Convection

Safety
Operation temperature: -5~40°C
Protection: IP-20

Remarks:
DMX, Kling- & Artnet
Tariff No.: 9405 40 99

Accessories:
75H50180
75H50224
75H502267