• Klingnet, Artnet, DMX
• Built-in Ethernet switch
• P25 4x40 pixels
• Sliding bracket
The PixelBatten P25 MKII is more versatile then it's predecessor. Now it is equipped with not only Klingnet, but also DMX and Artnet onboard. This makes it possible to use the PixelBatten with a wider range of controllers and software. It has two Ethernet RJ-45 ports with built-in switch for linking Klingnet or Artnet. Powercon in/out and DMX in/out for daisy chain power and data. The 2x18 character display makes it easy to set network and fixture settings. The DMT Pixelbatten P25 MKII has a length of 1m and contains 160 pixels with a pitch of 25mm. The pixels are mounted in a configuration of 40x4 pixels. It has a sliding bracket for flexible rigging and the possibility to connect multiple battens in vertical position to eliminate gaps in between. Each batten should always be rigged separately. Use the batten in combination with the strip and the tile to make creative visual setups.
Specification:
Light Source
LED System: 160x 5050 SMD RGB
Luminance: 850 nits
Refresh rate: 100Hz
Electrical
Power Supply: 100-240 VAC, 50/60Hz
Power Consumption: 100W Max
Control
Control Protocol: DMX512, Artnet, Klingnet
DMX channels: 8, 480Ch
Built-in programs: 30 (can be selected over DMX512)
Optical system
Dimmer: 0-100%
Max strobe freq: 25Hz
View Angle: 120 degrees
Pixels: 40Hx4V
Pixelpitch: 25mm
Cover: Medium Frost
Physical
Dimensions: 1000 x 140 x 105mm
Weight: 3,8Kg
Housing: Die-cast aluminium, metal bracket
Color: Black
Power Connectors: Blue/White Power connector
Data Connectors: 3p XLR, RJ-45 in-&output
Cooling: Convection
Safety
Operation temperature: -5~40°C
Protection: IP-20
Remarks:
DMX, Kling- & Artnet
Tariff No.: 9405 40 99
Accessories:
75H50180
75H50224
75H502267
Unfortunately there are no review yet. Be the first who rate this product.
You must be logged in to submit a review. Login