DMT SB-803 Sender Box Pro

• Patch led screens without use of a computer and Led Studio
• 802 Sendercard included
• DVI-D and HDMI input
The DMT SB-803 follows up SB-801 and is the only piece of equipment required between the video source and your LED screen.The device takes a digital video (DVI or HDMI) input and converts it, so it can be sent over a single CAT-5(RJ45)cable to your LED Screen.
Connections are made by Neutrik Ethercon connectors ensuring a reliable connection in any situation.

Maximum 4 pcs of SB-803 can be used in cascade for higher resolution screen.
The DMT SB-803 is equipped with a sendercard which is compatible with all DMT LED Screens.

With SB-803 you don't have to worry about which version Led Studio to use. SB-803 lets you patch your led screen directly from the internal menu, so no need for a computer with Led Studio anymore.

Specification:
Sendercard Type: 802
Video input: DVI-D + HDMI
Scaling : NO
Outputs to screen: 2 ethercon(RJ45) soft-patched connectors
Power input: Powercon IN/OUT
Setup port: USB-B,
RS 232 connection on the back side. The RS 232 is used for cascade
Screen brightness control: 16-levels adjustment on the front panel
Resolutions: 1024 x 768, 1280 x 768, 1280 x 800, 1280 x 768, 1280 x 1024, 1366 x 768, 1440 x 900, 1440 x 1080, 1600 x 576, 1600 x 900, 1600 x 1000, 1600 x 1200, 1680 x 1050, 1728 x 1296, 1920 x 1080
Power consumption: 25 watts
Input voltage: 85-264 volts,50-60Hz
Weight: 4.5Kg(10lbs)
Dimensions: 48cm*26.8cm*4.4cm
Standard rack size: 1U
Cooling: Active by built in fan.

Tariff No.: 8203 20 00